You’ll get a simple, corrosion-resistant support that stops cover sag and water pooling on most pontoons without scratching rails. It uses two adjustable anodized poles, 60′ of UV-stable polypropylene webbing, quick-release buckles and molded hooks to form a firm ridge and direct runoff. Installation is fast and removable for boatyards, though poles top out at 50″ and tensioning is manual. Keep going to see fit tips, parts, and durability notes. Taylor made products boat cover review highlights the benefits of this innovative solution for protecting your vessel. Users have reported significant improvements in cover stability and waterproofing performance. Overall, it stands out for its practicality and ease of use, making it a top choice for boat owners.
Some Key Takeaways
- Prevents cover sagging and water pooling by creating a pitched ridge with two adjustable anodized poles and tensioned webbing.
- Universal fit for most pontoons: poles adjust 27″–50″ and 60′ of webbing accommodates standard and oversized boats.
- Durable materials: bright-dip anodized poles resist corrosion and UV-stable polypropylene webbing minimizes degradation.
- Quick-install system with quick-release buckles, injection-molded hooks, and support pads for fast, non-marring attachment.
- Best for seasonal/removeable use; not ideal for permanent mounts or extra-large pontoons needing custom supports.
What the Taylor Made Pontoon Boat Cover Support System Actually Does
While you’re storing a pontoon, the Taylor Made Pontoon Boat Cover Support System keeps your cover from sagging and collecting water, mold, or debris. You set two adjustable anodized poles and secure 60′ of polypropylene webbing to create a firm ridge, enabling slope creation that directs runoff away from the cover. Quick-release buckles and injection-molded hooks let you tension the system to match rail spacing without marring surfaces. By preventing water pooling and fabric stress, the unit reduces mildew risk and prolongs fabric integrity, so you get measurable cover longevity and easier seasonal maintenance. Emergency whistles are a useful safety accessory to have on hand at the beach to signal for help in low-visibility or crowded conditions, especially when boating or during water activities with audible signaling.
Who Should Buy It: Fit, Boat Types, and Installation Needs
Who owns this system? You do if you run a pontoon and need reliable cover tensioning. It fits most pontoon layouts with universal straps and adjustable 27″–50″ poles, so owners of standard and oversized pontoons will find it useful. You’ll appreciate non-marring materials if you worry about rail scuffs. Choose it when you want easier seasonal storage and reduced mold risk from pooled water. It’s also good for boatyards managing multiple covers—stack maintenance is simpler with removable straps and quick-release buckles. If you need custom fabrication or permanent mounts, consider alternatives. Many pontoon owners also use portable gear designed for easy beach days to transport their cover support system and related accessories.
Hands-On Breakdown: Materials, Parts, and How the System Works
Because proper support starts with the right components, the Taylor Made 55745 kit gives you two bright-dip anodized poles, 60 feet of 1″ polypropylene webbing, quick-release 12″ adjuster buckles, four injection-molded hooks, and support pads—each part designed to work together to create a pitched, non-marring support under your pontoon cover. You’ll note durable material sourcing: anodized metal for corrosion resistance and UV-stable polypropylene webbing. Installation tips: lay straps, position poles, tension with buckles, and anchor hooks to decking. Tool checklist is minimal—gloves and a ladder. Follow simple maintenance routines: rinse salt, inspect fittings, and store dry. For sandy or beachside storage, consider a reliable beach umbrella anchor to keep gear secure in shifting conditions.
Real-World Performance: Preventing Water Pooling, Durability, and UV Resistance
Having covered the parts and setup, let’s look at how the 55745 performs on the water: the angled poles and properly tensioned webbing create a consistent slope that sheds rain and melt, preventing the saddles and pockets that stretch covers and trap moisture. You’ll notice reduced pooling immediately; runoff follows the intended channels so fabric stays drier and mold risk drops. Bright-dip anodized poles resist corrosion, and non-marring parts preserve rails. Webbing and buckles hold tension over seasons, and the cover’s water repellency works with the supports. Expect reasonable long term fading from UV exposure, but structural wear is minimal. For users who spend time at the shore, pairing this system with a windproof beach umbrella ensures gear stays protected in blustery coastal conditions.
Buying Checklist: Sizing, Compatibility, Pros vs. Cons, and Final Recommendation
Wondering whether the Taylor Made 55745 will fit your pontoon and meet your needs? Check size charts for cover dimensions and rail clearance, then measure bow-to-stern and rail height. Compatibility is broad—universal fit with adjustable 27″–50″ poles and 60′ webbing—but verify hook placement and pad spacing. Pros: prevents pooling, UV-resistant anodized poles, non-marring materials, easy install. Cons: limited pole length ceiling, manual tensioning, single-unit kit may not suit extra-large pontoons. For purchase timing, buy before storage season and storms. Recommendation: if measurements match, this is a practical, affordable support solution. If you also use your pontoon for beach outings, consider a beach cart to simplify hauling gear and supplies.
Some Questions Answered
Is Professional Installation Required?
No, professional installation isn’t required. You can handle installation options yourself using the adjustable poles, 60′ webbing and quick-release buckles; the kit’s non-marring hooks and pads make DIY straightforward. If you prefer convenience or lack tools, hiring an installer is optional — installer cost will vary by shop and location but is typically low since setup is simple and fast. You’ll save money doing it yourself.
Can It Be Used on Non-Pontoon Boats?
Yes — you can use it on non-pontoon boats if you adapt attachment points and avoid interfering with deck hardware. The adjustable poles and 60′ webbing let you create a slope and prevent water pooling over cabins or open boats. Take care to position hooks and support pads to preserve hull protection and avoid chafing; use non-marring contact points and inspect fittings regularly for secure, damage-free support.
Are Replacement Parts Available Separately?
Yes — you can get replacement parts separately through Taylor Made or dealers. Check compatibility by confirming material compatibility (polypropylene webbing, anodized poles, injection-molded hooks) with the originals. When ordering, specify model 55745 and which attachment methods you need (webbing, buckles, hooks, pads or poles). Dealers or Lippert customer service can confirm availability, part numbers, and proper fit before you buy replacements.
How Does It Perform in Heavy Snow?
It sheds light snow fairly well, but you shouldn’t rely on it for heavy, wet accumulation. The adjustable poles and sloped webbing help snow shedding, reducing pooling that causes frame stress. With very heavy snow you’ll need to clear buildup manually to prevent excessive load on poles and hooks. Regular checks and prompt removal of deep, wet snow will keep the system functioning and avoid permanent deformation or attachment failure.
Is There a Warranty Included?
No, the product itself doesn’t include a manufacturer warranty statement in the provided info. You should check the retailer or Taylor Made for explicit warranty coverage and the claim process. If a warranty applies, you’ll likely need proof of purchase and product details (model 55745, UPC 040011264909). Contact Taylor Made/Lippert customer service or your seller for exact terms, duration, and steps to file a claim; keep photos and records handy.
